Because of its good quality and unique appearance, the copper door has been favored by many consumers. However, there are some problems in the process of using the copper door. The following manufacturers will share the tips for the use of copper doors.

The elastic door block can be made by itself. The copper door of the home often has to be switched. When the copper door is opened, it often directly hits the wall. For a long time, the lock box and the handle on the door are easy to touch the wall, damage the wall and The copper door affects the appearance. You can find a rubber block about 5 cm thick or a thick rubber on a small wooden block, and nail it into the lower corner of the side of the hinge in the copper door, so that the copper door will not be damaged.

Don't use the hand with water stains to open the door lock to avoid discoloration. When opening the door lock or turning the door lock handle, do not use too much force to reduce the service life of the door lock. Frequently moving hardware such as hinges, door locks, etc., should be tightened when loose. When the door lock is not working properly, you can add an appropriate amount of pencil core foam to the keyhole.

If the copper door is not blown away by the wind, if the copper door in the home is closed, if it is easy to be blown open by the wind or not opened, it is inconvenient and unsafe. You can find a strong magnet of appropriate size and bury it flat above the door frame. About 1/4 of the height of the door, and then a piece of iron is nailed to the door frame and the door frame, and the door and window are prevented from being blown away by the wind.