Compared with other categories, in addition to the splendid and calm atmosphere of the bronze door, there is also a characteristic that is favorable to Feng Shui. Because the bronze gate is a symbol of noble and auspicious, in ancient times, only the emperor would use the bronze door of the door of the family. Nowadays, with the continuous improvement of people's living standards, the bronze door of the villa has also flown into the homes of ordinary people. In Feng Shui, the copper door of the villa is noble and elegant, which symbolizes good luck. Like the family's loyal "guardian god."

      1. Actually measure the width and height of the door opening. It is necessary to measure whether the upper, middle and lower parts of the door hole are consistent. If they are inconsistent, the narrowest point shall prevail, but the error shall not exceed 20 mm.

2. For the error exceeding 20mm, the wall hole should be corrected. The correction can be corrected by cement mortar or lime.

3. The thickness measurement of the door wall should also be measured in the upper, middle and lower parts. See if the thickness of the wall is the same. Also, see if the thickness of the wall on the left and right walls and the top of the door is the same. Maximum value, but the error must not exceed 5mm.

4. If the wall thickness error exceeds 5mm, it needs to be corrected.

5. If the wall is a T-wall, you need to use a blockboard to make a false wall with a width of 50-60mm. The thickness is the same as the wall thickness of the wall.

6. The thickness of the door wall is at least 80mm. The strength of the door frame with a low and 80mm size is not very strong, and the support for the door is not strong enough. If it is less than 80mm, it is necessary to thicken the thickness of the wall to 80mm or more.

7. When there is a protruding beam on the door hole, the upper door line cannot be installed. It is also necessary to use a blockboard to make a fake wall of 50-60 mm height, the length of which is the same as the width of the door opening, and the depth is the same as the thickness of the door opening.

8. The door has steps. The step line on the step side should be added with the step height, and the specific size is determined according to the height of the step.

9. The thickness of the wall of the bathroom and kitchen door wall should pay particular attention to the thickness of the wall tile on the wall. Generally, the single-sided tiling is thickened by 25mm, and the two-sided tiling is thickened by 50mm. The specific situation is signed and confirmed by the designer and the customer and the decoration company. The final dimensions should include the thickness of the wall tiles. It is best to measure after the wall tiles are attached.

10. Pay attention to the opening direction of the door when measuring. The opening direction is defined as: from the front of the door, the handle is left to the left and the handle is to the right.

11. The dumb and window cover measurements are basically the same as the door hole measurement, except that the dimensions are recorded according to the actual measurement results and are not deducted.

Dumb: Refers to wall openings that are not doord or shielded by other things, such as the opening between the living room and balcony, bedroom and balcony.

Window cover: refers to the wooden cover (or other material) wrapped around the window frame and the door frame, which is a few centimeters on the wall.

As a brand, the copper door is a high-end product of the category. It is rich and elegant, and the matching locks must be matched with it. It should not be used in ordinary times. Many copper door factories will choose a lock factory with strong brand strength. According to statistics, China's demand for high-end locks in the next five years will exceed 10 billion US dollars. Therefore, lock enterprises should work hard to develop internal products, continuously develop new products with high technology and high added value, and increase brand cultivation efforts on the basis of vigorously improving the quality of products. It can be said that the importance of branding should be the consensus of many lock companies.

  Take an artistic and personalized route. At present, the bronze door is not only a security door, but also a kind of art. Therefore, lock enterprises must do their homework in the design of locks, increase development efforts, cultivate personalized, artistic products, and achieve product differentiation to attract the attention of the copper door factory.